Engineering – Electrical Engineering



2015 /2558

  1. Design and installation of electrical systems in the meeting room
  2. Design of the network placement over Fiber to the x (FTTx)
  3. Education Generator at Naval Dockyard Department (Repairing Electrical Division)
  4. Electrical Installation System in Sindhorn Residence Condominium
  5. Electrical System Installation of Solar Energy in Office Building
  6. Fire Protection System of City Home Condo
  7. House-hold telephone switching in TOT Bangkae telephone exchanger
  8. Inspection and Testing of Electrical Grounded System
  9. Installation and Maintenance of Generator
  10. Maintenance of Electrical System in Tonson Tower
  11. Maintenance of The Emergency Generator at Ratchaburi Power Plant
  12. Maintenance of Water Cooled Chiller
  13. MDB Assembly for Industrial Factory With V.R.V Corporation Company Limited
  14. Ozone Generators For Odor Removal
  15. The Design and Construction of Magnetic Contactor Test At Khanom Gas Separation Plant Co., Ltd.
  16. The fire alarm system in the Magnolias Ratchadamri Boulevard Condominium
  17. The Maintenance of Electrical system at Ratchasuda Building Chulalongkorn University
  18. The Maintenance of Generator in the Condo One
  19. The Maintenance of Spilt Type Air Conditioner System at Bangkok City Tower Building
  20. The test circuit breakers Khanom Electricity Generating Co., Ltd
  21. THE TESTING OF FIRE ALARM SYSTEM IN BUILDING AT THE STOCK EXCHANGE OF THAILAND
  22. Underground Electrical System
  23. AUTOMATIC SLIDE PORK MACHINE CONTROLLED BY MICROCONTROLLER
  24. DESIGN AND CONSTRUCTION OF PLC EXPERIMENT SET FOR INSTRUCTIONAL MEDIA
  25. DESIGN AND CONSTRUCTION OF MEDICINE CUPBOARD FOR BLINDNESS CONTROLLED BY MICROCONTROLLER
  26. DESIGN AND CONSTRUCTION OF THE JANGLON TOASTER CONTROLLED BY PROGRAMMABLE LOGIC CONTROLLER
  27. DESIGN AND CONSTRUCTION OF TIME SCHEDULE DISPLAY BOARD FOR CONTACT TEACHER CONTROLLED BY MICROCONTROLLER
  28. DESIGN AND CONSTRUCTION OF AC MOTOR SPEED CONTROLLED SET BY ADJUSTED FREQUENCY CONTROLLED BY MICROCONTROLLER
  29. DESIGN OF VOLTAGE MODE PIDA CONTROLLER BASED ON OP- AMP AND CCII
  30. Characteristics Comparison to PID Controllers Using OP-AMPs and CCIIs

  • Design and Construction of Work Piece Loading Equipment Using Earth’s Gravity
  • Maintenance of Electrical System at C.P. Tower Silom
  • Design and Construction of Vacuum Machines for Aluminum Injection Molding Machines Controlled by PLC
  • Study of Chiller Control at Homepro (Rajapruk)
  • Analysis of the PLC Instruction Set and Improvement of Equipment of the Automatic Finger Joint Assembly Machine
  • Installation of Air Conditioning and Ventilation Systems
  • Repairing and Maintenance of Fiber Cable and Fiber Optic
  • Remodel the Control Panal for water pump at BaanEuaArthorn Project
  • Maintenance of Electrical System in Chamchuri Square Shopping Center
  • Control Cabinet For Rice Dryer
  • Maintenance of Electrical System in Chamchuri Square
  • Mobile Station for Digital Trunked Radio System
  • Installation and Maintenance of an Air Dryer
  • Installation and Maintenance of an Air Compressor
  • Maintenance of Electrical Systems in Chamchuri-square Building
  • Installation of Electrical Cabinets Broadcast Communications
  • Updated Electrical System of The Building
  • Maintenance of Copiers Model E 2330c

Abstract

This cooperative education project presents useful experiences in design and construction of work piece loading equipment using Earth’s gravity. This is a learning experience during cooperative education with Hino Motors Manufacturing Thailand) Co., Ltd. The equipment designed and built will be used to load the work piece in the production line. The principle of design and construction of work piece loading equipment has been thoroughly presented in this cooperative education project.

Keywords: Design and Construction/ WorkPiece Loading Equipment/ Earth’s Gravity

Abstract

This cooperative education project presents useful experiences in electrical system maintenance at C.P. Tower Silom. This is a learning experience during cooperative education with C.P. LAND Co., Ltd. (PCL). The installed electrical system consists of power distribution, lighting, air conditioning, uninterruptible power supply and fire alarm. Principles of electrical system maintenance have been thoroughly presented in this cooperative education project.

Keywords: Maintenance/ Electrical System/ Uninterruptible Power Supply/ Fire Alarm System

Abstract

This cooperative education project presents useful experiences in design and construction of vacuum machines for aluminum injection molding machines controlled by PLC. This is a learning experience during cooperative education with Thai Chanathorn Industry Co., Ltd. This design and construction vacuum machines will be used for vacuum molding to minimize incomplete forming problem. The principle of design and construction of vacuum machines for aluminum injection molding machines controlled by PLC has been thoroughly presented in this cooperative education project.

Keywords: Vacuum Machine/ Aluminum Injection Molding Machine/PLC

Abstract

This cooperative education project presents the practice experiences at the HomeProduct center limited company. The address is 82 Rajapruk rd, Banksritong district, Bangkruai, Nonthaburi province. It is a collaborative project between the cooperative education in Siam University and the company. The main contents consist of the chiller machine, motor pump, water pump, heat ventilation machine, cooling tower, air handling unit controls and temperature check. The details are proposed in this.

Keywords : chiller / water pump/ heat ventilation machine

Abstract

This cooperative education project presents an analysis of the programmable logic controller (PLC) instruction set and improvement of equipment of the old automatic finger joint assembly machine at Tanaphon Wood Limited Partnership. The procedure starts from machine’s components testing, study of operating principle of the machine, PLC instruction set analyzing, interfacing between PLC and input/output devices, and performance testing. The improved machine has the characteristics of running completely and safety. The theory and operation of the components in the finger joint assembly machine as well as the PLC instruction set are described in detail in the report.

Keywords: Automatic Finger Joint Assembly Machine / Programmable Logic Controller /Input and Output Devices

Abstract

This thesis presents the design and installation of the air conditioning and ventilation systems. This is the gained knowledge daring the practical training program cooperative education in Siam University with Peeriess Engineering Company limited. The company has assigned the air conditioning and ventilation systems project. There are three parts of main duty in the company such as electrical system, air conditioning and ventilation systems. The important contents consist of devices, operation, calculating, estimation, design, installation and pressure measuring.

Keywords : air condition system / ventilation system / electrical system

Abstract

This cooperative education project presents repairing and maintenance of the fiber cables and fiber optics. The experiences gained from the training in practical cooperative education program between Siam University with True Corporation Public Company limited. The company has assigned the repairing and maintenance of the cable and fiber optic. The area of responsibility is from Ladya Road to Phuttha Bucha Road. The practical knowledge results can be applied to practical work well in the future.

Keywords : fiber cable/fiber optic /repairing

Abstract

This cooperative education project presents the improvement of water pump controller at the main building of Low-cost housing project. This company has assigned jobs to maintain the electrical motor pump system, power supply system, and the control panel. The experience gained from the practices during cooperative education program between Siam university and I.E.P. engineering Limited can be applied to more understanding of educational engineering theory knowledge.

Keyword: Remodel control panel/ Control Electric power /Water pump system

Abstract

This cooperative education report presents the maintenance of electrical system at Chamchuri Square Shopping Center, which are the practice of cooperative education project of Siam University students and Prompt Techno Service (PTS) Co., Ltd. This company has been involved in the design and installation of electrical system, sanitary system and air conditioning system. This main assisment the maintenance of electrical systems in buildings. The study results and methodologies in electrical standards and electrical system protection are presented in details.

Keywords: Electrical maintenance/ Electrical protection/ Electrical standard

Abstract

This cooperative education project presents a construction of control cabinet for rice dryer. It is consisted of magnetic relay control units, timer units, breakers and inverters. The rice dryer is controlled in three-phase electrical system. In actual operation, we use the inverter with five sets to control three-phase motors by magnetic relay units. Test results show that the control cabinet can control the rice dryer effectively and efficiently. The control cabinet for rice dryer can work properly according to its function.

Keywords: Control cabinet / Rice dryer / Inverter / Magnetic contactor / Relay

Abstract

This thesis presents the maintenance of electrical system in Chamchuri Square zone commercial building. The experiences took place during the cooperative education practice of Siam University with the Prompt Techno Service co., ltd (PTS).This report proposes work experiences on maintenance of the electrical, lighting and air conditioning systems in Chamchuri Square zone commercial building. The practical knowledge results can be applied to practical work well.

Keywords : Electrical System / Lighting System / Maintenance

Abstract

This report offers a study of mobile stations for digital trunked radio system in cooperation between cooperative education project. Siam University and United Steel Work Co., Ltd. This company is located in Tha-Mai sub-district, Kratumban district Samutsakorn provice, which has a production project of mobile station for digital trunked radio system. In the assemble process, the main equipment consists of cabinet control sets, surge protectors and consumer units. The equipment installed in the cabinet, will be a part of communication system. Then, this radio communication system will be installed by contractors. Finally, the mobile station is tested and the test results demonstrate that electrical system and equipment inside the cabinet can work normally and can be used in actual operation.

Keywords: Electrical system/ Digital trunked radio system

Abstract

Air dryers are used for removing liquid water or vapor from compressed air of the air compressor system. Excessive liquid water or vapor in compressed air can cause a variety of problems including corrosion in piping and equipment, malfunctioning of pneumatic process control instruments, fouling of processes and products, and more. This report presents work experiences on the installation and maintenance of the air dryers, which are studied during the cooperative education practice with Siriwat Corporation (1976) Company, Limited. The operating principle and the parts of an air dryer include the compressor, condenser, evaporator, fan motor, valve, capillary tube and refrigerant are first described in details. Then, the installation and maintenance procedures of the air dryer are present clearly.

Keywords: Air Dryer / Compressed Air / Pneumatic

Abstract

Air compressors are used for various applications in manufacturing industries such as driving pneumatic components, blow cleaning, bolting and wrenching, nailing, cutting, drilling, grinding, spraying etc.. This report presents work experiences on the installation and maintenance of the air compressors, which are studied during the cooperative education practice with Siriwat Corporation (1976) Company, Limited. The operating principle and the parts of an air compressor include the motor, control valve, filters, pressure transducer, temperature sensor, pressure switch, PLC controller are first described in details. Then, the installation and maintenance procedures of the air compressor are presented clearly.

Keywords: Air Compressors / Pneumatic Components / Installation and Maintenance Procedures

Abstract

This cooperative education project presents the maintenance of electrical systems in the Chamchuri-Square Building. All of experience gain from the practices during cooperative education program between Siam University and Techno Service Company, Limited. The company has assigned jobs to maintain the electrical system, lighting and, air conditioning in the Chamchuri-Square Building. The practical knowledge results can be applied to practical work well.

Keywords : Electrical System / Lighting System / Air Condition System

Abstract

This project presents steps to install an electrical system and air conditioning inside the transmitter cabinet which comes from operating in co-operative education practice of Siam University students. By working at Siam United Steel Co., Ltd. located in Samutsakorn, Krathum Baen, the company has a project with the installation of electrical system and air conditioning in the transmitter cabinet. The main devices inside the cabinet consist of high-voltage transformer, circuit-breaker, timer, humidity meter, temperature meter and smoke detector. The lighting system, cooling system and various detectors worked correctly according to timer setting and these can be used normally in actual condition.

Keywords: Electrical andair conditioningsystem / Sensors

Abstract

This thesis presents an electrical system improvement at the staffs’ resident buildings of Italian Thai Development Public Company Limited. The experiences took place during the cooperative education practice between Siam University and Italian Thai Development Public Company Limited. The main content proposed the electrical system improvement in the building’s room. The details contain electrical equipment, electrical appliances survey, power line calculation, power meter calculation, and load inside the building calculations. The results of the cooperative education practice are shown that the staffs’ resident buildings are more comfortable and safe.

Keywords : standards for electrical systems in the building. / Electrical appliances survey / Electrical improvement.

Abstract

This cooperative education project presents the maintenance of copiers model E 2330c. This is the practical experience during co-operation education program at Toshiba Tec Thailand Company Limited Rama 3 Road, Chong Nonsi, Yannawa, Bangkok. The company assigns to install software program copiers, change of spare parts and maintenance of copiers. The results are shown that learned knowledge in theory is compatible to practical work.

Keywords : Maintenance/ Copiers/Program

2016 /2559

CO-OP_Engineering – Electrical Engineering

Leave a Reply

Your email address will not be published. Required fields are marked *